Hose Assemblies

Stainless steel fittings 316L
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies
  • Hose Assemblies
    Hose Assemblies
    Hose Assemblies

More imáges:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

Available in 316L stainless steel, with the exception of the nuts and ferrules which are made of 304 stainless steel. Other fittings can be assembled upon request (RJT, FIL, ISS, MACON, GAS, JIC, flanges). Clamps and auxiliary parts for welding can also be manufactured.

SZR® System

The concept of SZR® has been fully researched for the flexible hoses produced by Venair. This system ensures that the hoses equipped with metal fittings on both ends satisfy even the most demanding requirements of the food, pharmaceutical, cosmetics and chemical market, since all areas where contamination may occur between the joint of the hose and the fittings are eliminated by placing them at the same level.

The SZR® system is designed to prevent the utmost differences in diameter between the metal fitting and the hose, ensuring continuous product flow without inner turbulence. This leads to time saving by allowing on-site cleaning (CIP) to be performed without disassembly. The SZR® assembly system ensures a higher level of non-retention in the flexible hoses, as well as greater safety of use. Moreover, our crimped hoses can be certified according to the 3A Sanitary Standard 62-02 for hose assemblies.

QUALITY OF FINISH

The roughness of the inner surface of the SZR® fittings presents a maximum rugosity of 0.8 microns and can be improved on request. The batch number for the raw material used is indicated on each fitting. All connections are manufactured in a single block, without welds, and the flexed 45º or 90º connections are secured by an orbital weld.

3A Sanitary Standard

3A Sanitary Standards, Inc. (3A SSI) is an independent, not-for-profit corporation dedicated to advancing hygienic equipment design for the food, beverage, and pharmaceutical industries. 3A SSI represents the interests of three stakeholder groups with a common commitment to promoting food safety and the public health-regulatory sanitarians, equipment fabricators and processors.

3A Sanitary Standard for Hose Assemblies (Number 62-02) is a standard which covers the sanitary aspects of the hose assemblies consisting of a sanitary couplings permanently attached to one of both ends of multiple-use smooth-bore hoses in a manner such that the resultant hose-to-coupling junction is suitable for cleaning-in-place or ‘CIPable’. 3A SSI formulates sanitary standards and accepted practices for the sanitary design, fabrication, installation and cleanability of dairy and food equipment or systems used to handle, process and package consumable products where a high degree of sanitation is required.

Venair’s dedication in providing the highest possible quality, sanitary and hygienic hose assemblies has driven us to obtain and uphold the standards and requirements outlined by the 3A association and in regard the hose assemblies we manufacture. Just another step towards our management driven objective: Offer our customers the highest quality products in the market.

Ask for information

Contact form

REF:
Hose Assemblies
Name and surname *
Company
E-mail *
Telephone *
Contact *
Description
*
Aviso legal