CONSTRUCTION

Elastomer: Peroxides or Platinum Cured silicone.
Hoses in compliance with american normative FDA 21 CFR 177.2600, FDA-BfR part XV from Germany, and optionally with USP Class VI.
Textil reinforcement: Polyester.
It exists a reinforced version (640 MIF) which can resist a higher pression
Stainless steel inside: No
Inner appearance: Translucent and smooth.
Outer appearance: Translucent, white or coloured, and smooth.
Length of manufacture: 4m (6m in some dimensions under request).

Silicone material options:
-FDA / BfR part XV
-FDA / BfR Part XV Platinum Cured
-USP Class VI Platinum Cured

TEMPERATURE

The appropriate range of temperatures in which the tube works properly is between -60ºC and 200ºC (-76ºF & 356ºF).

APPLICATIONS

For use in straight sections where flexibility is not required.

This model is used often to detect metal particles which may occur during filling of food products such as cream or baby food.
It is not recommended for vacuum.

DIMENSIONS

We work with tubes of 4m long (for specific diameters up to 6m long) in the following diameters:
6-8-10-13-16-18-20-22-25-28-32-35-38-40-42-45-50-55-63-76-90-100-102 mm.

PROPERTIES

These tubes are usually translucent. However, in order to distinguish the products conveyed through the tube, they can also be manufactured so that the outer part of the tube is the desired colour.

Hoses can be sterilized by hot air at +250ºC (+482ºF) or by steam at +135ºC (+275ºF), with a pressure of 3.5bar.
Maximum recommended time: 1 hr 30m. at +135ºC (+275ºF)