Contact now with one of our sales representatives:

Free call request Contact form

Company

News

Contact

Location

Venair Tuning

PRODUCTS
Information
ISO 9001 ISO 14001 Emas

Vena® 655

Vena® 655


sil_655_3011.pdf Contact form

CONSTRUCTION


Elastomer:
Peroxides or Platinum Cured silicone.
Hoses in compliance with american normative FDA 21 CFR 177.2600, FDA-BfR part XV from Germany, and optionally with USP Class VI.
Textil reinforcement: Polyester.
Stainless steel inside: Double 302 L Stainless steel wire spring encased inside the hose.
Inner appearance: Translucent and smooth.
Outer appearance: Translucent, white or coloured, and smooth.
Length of manufacture: 4m (6m in some dimensions under request).

Silicone material options:
-FDA / BfR part XV
-FDA / BfR Part XV Platinum Cured
-USP Class VI Platinum Cured

TEMPERATURE

The appropriate range of temperatures in which the tube works properly is between -60ºC and 200ºC (-76ºF & 356ºF).

APPLICATIONS

It is the strongest tube of the Vena Sil range. Designed for use at specific points where there may be sudden high pressure surges (hammering).
Ideal for use in proportioning and loading tanks in any length.
These tubes compensate vibrations and level differences
Due to the double spiral inside it is suitable for pressure or vacuum.

DIMENSIONS

We work with tubes of 4m long (for specific diameters up to 6m long) in the following diameters:
6-8-10-13-16-18-20-22-25-28-32-35-38-40-42-45-50-5-63-76-90-100-102 mm.

PROPERTIES

These tubes are usually translucent. However, in order to distinguish the products conveyed through the tube, they can also be manufactured so that the outer part of the tube is the desired colour.


Hoses can be sterilized by hot air at +250ºC (+482ºF) or by steam at +135ºC (+275ºF), with a pressure of 3.5bar.
Maximum recommended time: 1 hr 30m. at +135ºC (+275ºF)

Main Page News Contact Location Venair Tuning

Copyright © 2010 | Legal Advice | Designed byTOTBITS