CONSTRUCTION

Elastomer: Extruded silicone hoses in peroxides of platinum cured quality.
Hoses in compliance with american normative FDA 21 CFR 177.2600, FDA-BfR part XV from Germany, and optionally with USP Class VI.
Textil reinforcement: Polyester fiber braiding.
Stainless steel inside: No
Inner appearance: Translucent and smooth.
Outer appearance: Translucent or coloured, and smooth.
Length of manufacture: 10 & 20m

Silicone material options:
-FDA / BfR part XV
-FDA / BfR Part XV Platinum Cured
-USP Class VI Platinum Cured

TEMPERATURE

The appropriate range of temperatures in which the tube works properly is between -60ºC and 200ºC (-76ºF & 356ºF).

APPLICATIONS

For transporting liquids at low pressure where a closed bending radius is not required.
Ideal for use in proportioning and loading tanks in any length.
These tubes compensate vibrations and level differences
It is not recommended for vacuum.

DIMENSIONS

We provide with lengths of 20m in the following inside diameters:
5, 6.35, 7.93, 9.52, 12.7, 15.87, 19.05, 22.22, 25.40, 31.75 mm.

For longer lengths, please contact us.

PROPERTIES

These tubes are usually translucent. However, in order to distinguish the products conveyed through the tube, they can also be manufactured so that the outer part of the tube is the desired colour.

Hoses can be sterilized by hot air at +250ºC (+482ºF) or by steam at +135ºC (+275ºF), with a pressure of 3.5bar.
Maximum recommended time: 1 hr 30m. at +135ºC (+275ºF)