This product is manufactured to convey highly aggressive products. The product is produced with PFA and silicone, all in one single layer, which avoids filtrations and possible leaks. This exclusive combination of high quality materials gives to the hose an excellent resistance to chemical products.
The product has a wide range of application due to PFA coating, which provides a high resistance to aggressive substances.
The construction of this hose confers balance between lightness and strength, making the product easy to install.
These hoses are manufactured with FDA and USP Class VI silicone. The product has an inner PFA layer with a resistivity lower than 106Ω.
The Venaflon® HF-X has a polyester reinforcement and a stainless steel spring wire (AISI 304) between layers.
The product can be supplied with stainless steel 316L fittings. It can also be fitted with clamp couplings with a PFA coating.
The inner layer is completely smooth.
The outer layer is white and the internal one, black.
-30ºC a 150ºC (86ºF a 302ºF)
The inner layer of PFA complies with FDA and USP Class VI.
The outer silicone layer meets the same standards, besides the European Pharmacopoeia 3.1.9
- Odorless, tasteless and completely non-toxic.
- The hose is very flexible and has small bending radius.
- The vacuum resistance of this hose is 0.9bar (13.05psi)
The products is available in the following diameters:
mm: 19, 25, 32, 38, 51
inches: ¾, 1, 1 ¼, 1 ½, 2
The hose can be supplied in 20m rolls (66 ft)
- US FDA (Foods and Drugs Administration) Standard 21 CFR 177.2600
- USP Class VI standard (70ºC) Biological Reactivity Tests, In Vivo