All for Joomla All for Webmasters

VENA® SIL TURBO

HOSE WITH THREE OR FOUR ARAMID REINFORCEMENTS, VMQ SILICONE RUBBER AND THE INNER LAYER IN FVMQ OR IN VMQ SILICONE.

Applications:

This reference is recommended for its use in cooling systems in buses, coaches, lorries and industrial vehicles, cooling systems in cogeneration units and marine engines, and transport of high temperature fluids in general industry. These hoses are commended for its use in straight sections without curves.

The inner layer could be made in FVMQ silicone which is especially recommended for turbocharger systems in industrial vehicles due to its high capacity to withstand hydrocarbons and oil particles in the cooling pressurized air.

It can also be made with R/A VMQ silicone which is especially recommended for cooling systems.

Properties:

  • Smooth inner and outer appearance. Red outer and inner color. When the inner layer is made of FVMQ silicone the inner layer is dark blue or black.
  • Excellent flexibility during the assembly process.
  • Not affected by anti-freeze or anti-rust liquids.
  • Excellent resistance to thermal aging and oxidizing agents (oxygen, ozone and UV)
  • Highly resistant to hardening with very good compression characteristics.
  • Operational temperature range from -60°C (-75 F) to +200°C (392 F), it may reach up to 220°C (428 F) during short periods of time.
  • The standard manufacturing length is 4 meters long (13.12 ft.), although it is available in shorter lengths if necessary. It can also be manufactured in shaped form as elbow or double curves.
More information
Certificates
Customizations

More information

Appearance:

Smooth piece with convolutions.

Temperature:

-60ºC / +200ºC (peaks up to 220ºC)

-76ºF / 392ºF (peaks up to 428ºF)

Construction:

This reference could be manufactured with three or four aramid reinforcements. The external rubber is always VMQ silicone rubber (Vinyl-Methyl Quality) and the inner layer could be made in FVMQ or in VMQ silicone.

Certificates

Certificates:

  • The burning, smoke and dripping class of this reference is S-3, SR-2 and ST-2 according to DIN 54837:2007 test standard and DIN 5510-2:2009 classification standard.
  • This reference is classified by UL94 as V1.
  • Silicone rubber used is in accordance with EU Directive 2002/95/ECC for Restriction of the use of hazardous substances (RoHS).

Customizations

FKM linerFKM liner instead of FVMQ available.
VMQ linerStandard VMQ silicone instead of FVMQ available.
ReductionsStraight and shaped reductions availables.
ShapesCustomized silicone shapes according to the customer requirements.
AssembliesCan be equipped with crimped fittings with the best technology to ensure the safest and smoothest transition connections. (SZR Systems – Non- retention area).
Aluminum protectionsCan be protected with a special aluminium coated fiberglass for reflecting the heat radiation.

Related Products